Home > Bicycle Engine Parts > Chains and Links >

4 Bolt Chain Tensioner With Bearing Wheel
4 Bolt Chain Tensioner With Bearing Wheel


 
Our Price: $14.99


Product Code: EPFC6B

Description
 
Small plastic wheel with bracket to keep tension on motor chain. Wheel is with a sealed bearing race for smooth operation. An upgrade over the stock stud and wheel setup. 4 Bolt Design. Sits smaller than 2 bolt tensioner. Bracket is about 4" tall and 1 1/2" wide.

Average Customer Review: Average Customer Review: 2 of 5 2 of 5 Total Reviews: 1 Write a review.

  4 of 4 people found the following review helpful:
 
2 of 5 Be prepared to modify it to make it work. April 21, 2011
Reviewer: Andrew Morrell from Las Vegas, NV United States  
The only reason this tensioner is worth getting is for the bolt, bearing and wheel set up. The mount sucks. The 4 bolts used to mount it are cheap bolts just like all the bolts in these kits, the mount is slotted so you can move the tensioner, but you can only mount it halfway down what it is slotted for before the guide wheel hits one of the mounting bolts and the mount moves down the slot after about 5 mins of riding and then you have to re tighten the guide wheel. I drilled a separate single hole in order to make it work, and I had to replace the 4 bolts with quality bolts not because two got stripped when I tightened them down.

Was this review helpful to you?


Browse for more products in the same category as this item:

Bicycle Engine Parts > Chains and Links
Bicycle Engine Parts > Bicycle Engine Parts - All
Bicycle Engine Parts